Basketball player holding a ball on green interlocking sports tiles — AI-generated illustration

MODULAR COURT SYSTEMS

Every sport reads the floor differently.

A landing, a push-off, a stop, a slide: the floor answers each one differently — and every answer can be measured.

Measured, not promised.

Every figure on this page is listed in full. A record appears beside each figure as it is verified.

The datum sheet.

Multiple systems, one tolerance standard.

Nominal values as recorded in our specification system. Confirm the full floor build-up and the substrate before ordering.

Nominal values as recorded in our specification system. Confirm the full floor build-up and the substrate before ordering.
ParameterLAND 16PUSH 15PIVOT 10SLIDE 12
Thickness16 mm15.6 mm10.5 mm12 mm
Module340 × 340 mm340 × 340 mm304.8 × 304.8 mm250 × 250 mm
StructureDouble-layer panel over a raised foot grid, with open joints left for drainage.Flexible cross-rib base under a compliant top face, locked edge to edge.Thin, dense panel with a tight locking edge and a closed face.Small-format tile with a textured face and open joints.
Typical useBasketball, volleyballPickleball, badmintonFutsal, basketball cutsTennis

What’s inside.

Every system locks edge to edge over a raised base. The base carries the load, the joint takes the movement, and the open channels let water leave instead of sitting under the panel.

Nothing is glued down, so nothing has to be cut out when the site changes.

Top face
Panel body
Support base · open channel
Substrate
Schematic. Photographed section pending.

Pick your sport, then your floor.

Draw the court, place the systems, and take away a plan drawing with a quantity list.

Open the court designer

Produced in FIBA-approved facilities.

Certificate held by our production partner.

Send us your sport. Get a plan.

Tell us the sport, the dimensions and the site. You get a plan drawing and a quantity list back, not a brochure.

Start with your sport